Skip to main content

How are Chilly's Series 2 Coffee Cups assembled and disassembled?

Customer Service
  • Updated

Looking for Series 2 Bottle assembly? Click here.

 

Assembly

1. Align the drinking holes on the head and lid.

2. Press the lid onto the head until it clicks.

3. Insert retainer on the inside and rotate using a coin until it clicks.

 

Disassembly

1. You must remember to remove the round retainer on the inside of your lid. To remove, use a coin to rotate the retainer until it clicks and falls out of place.

2. Insert a round knife under the small hole and use as a lever to pop the lid off. You may need to twist the knife a little, like turning a key inside a lock. 
 

Coffee_Lid_Instructions__1_.gif

Related articles

Comments

4 comments

Date Votes
  • Philip Loh

    I can see the recommendation is to disassemble the lid for cleaning every couple of uses as per:

    Our Series 2 Coffee Cups can be disassembled for cleaning purposes. We find that doing so after every few uses is enough. You should not be required to disassemble your cup after each use, however, you are more than welcome to do so. 

    However I have had to disassemble the coffee cup lid after each use as I always find milky coffee residue in-between the head and the lid.

    It is cumbersome to disassemble it each time and the knife easily damages the lid as the gap typically isn't big enough for a blunt cutlery knife. You need to wriggle it in...

    Overall a disappointing experience compared to other coffee cups I have owned.

    1
  • Seon Ok Lee

    Hello.
    All bottles and cups are in good use.
    I have a question.
    How can I separate the lid and head of Series 2 to open and close the series more comfortably?
    I wonder.

    0
  • Lisanne Gibson

    this is a poor design with dirt building up in the lid after every use and the lid being quite difficult to disassemble and reassemble

    0
  • Phil Hockenhull
    • Edited

    I am finding it extremely difficult to be able to turn the series 2 coffee cup lid to open and close. The slanted edge with the practically useless grips is not easy to grip and turn.
    Is this a faulty product or are they all much the same!

    I have been purchasing Chilly products right from the beginning and have never found any reasons for complaint.

    0

Please sign in to leave a comment.

Powered by Zendesk